Quick Answer: PS5 frame interpolation means your PC receives a 30 fps console stream, uses an AI model to draw extra frames between each pair of real frames, and displays 60, 90 or up to 120 fps. The open-source frameglide tool does this over PlayStation Remote Play on Windows, using the RIFE model on an NVIDIA RTX graphics card. It adds input lag, so it suits driving and exploration games better than competitive shooters.

If your PS5 locks a big game to a 30 fps Quality mode and your monitor runs at 120 Hz, every pan looks like a slideshow. The usual fixes are a new console or an expensive 120 Hz HDMI chain. There's a cheaper route if you already own a Windows PC with a recent GPU: PS5 frame interpolation done on the PC side. The free project frameglide takes the stream your PC already receives and generates the in-between frames live.

How the Pipeline Actually Works

The console never runs anything new. Your PC connects to the PS5 over your home network, the same way the console maker's own Remote Play app does. The open-source Remote Play client chiaki-ng receives the video, plays the sound and sends your controller presses back. A small patch called the frame tap hands each decoded video frame to frameglide.

From there, the work happens on your graphics card:

  1. The video decoder unpacks each incoming frame and skips repeated frames.
  2. The AI cores draw new frames between each real pair using RIFE, running through NVIDIA's TensorRT runtime.
  3. The shader cores scale the 1080p picture to your monitor using AMD FSR 1.
  4. The display output shows one frame every refresh, so a 30 fps stream with two generated frames per pair reaches 90 fps.

The cost is small enough to matter. The project reports about 9 ms per generated frame on an RTX 4070 Ti SUPER, and FSR 1 takes about 0.1 ms. Those are the author's numbers on one card, so treat them as a starting point, not a guarantee for your hardware.

Why Smoother Doesn't Mean More Responsive

Here's the part most guides skip. The popular pitch is that frame generation gives you free smoothness. It doesn't come free.

To draw a frame between A and B, the software has to already have B. That means holding the newer real frame back until the in-between frame is ready. When X happens (a newer frame is buffered), Y follows (the picture arrives later than the controller input), because Z (interpolation needs the next real frame before it can show the middle one).

frameglide's README puts a number on it: roughly 36 ms of extra delay at 90 fps and about 20 ms at 60 fps, on top of Remote Play's own latency. At 60 fps, one frame lasts about 16.7 ms, so the added delay is more than a full frame. The game looks like 60 fps but still responds like 30.

That's the honest trade. Motion gets smoother, and your thumbs don't get faster. This is why the project itself recommends it for driving, exploring and story missions, and not for competitive online play.

Setting Up: What to Check Before You Press Play

Most setup problems come from skipping a few quick checks. Work through these in order:

  1. Download FrameGlide-Setup.exe from the project's Releases page.
  2. Optionally verify it. Run Get-FileHash "$env:USERPROFILE\Downloads\FrameGlide-Setup.exe" in PowerShell and compare the SHA-256 hash with the one listed on the Releases page.
  3. Run the installer. Windows SmartScreen will warn you because the installer isn't code-signed yet. Click More info → Run anyway. Setup takes 10–20 minutes, installs for your user only and doesn't ask for admin rights.
  4. Turn on Remote Play on the PS5, sign in to PSN and register the console from the app's Connect your PS5 guide.
  5. If the picture stays black or the console says the content can't be shown, turn off HDCP in the PS5's HDMI settings, connect again, then turn it back on for video apps.

Step five catches more people than anything else. HDCP is the copy-protection handshake, and it's the first suspect whenever the picture fails to appear.

Choosing an Upscaler and Frame Generator

Two separate choices shape the result: the AI model that draws frames and the scaler that fits the 1080p stream to your screen. They don't work the same way, so it helps to compare them directly.

OptionRuns onReported cost or speedBest fit
RIFE (default) via TensorRTNVIDIA RTX cardsAbout 9 ms per generated frame on an RTX 4070 Ti SUPERMost NVIDIA owners
NVIDIA VFG (optional download)RTX 40 and 50 seriesNot published in the project's READMERTX 40/50 owners who want NVIDIA's own model
RIFE via DirectML (Experimental)AMD and Intel GPUsAbout 1.7× slower than TensorRT, per the READMEExpect 60 fps, and 90 fps on a fast card

For scaling, AMD FSR 1 runs on shader cores in about 0.1 ms and works across GPU vendors. NVIDIA RTX Video Super Resolution is the alternative on RTX hardware. Pick FSR 1 unless you have a specific reason to prefer the NVIDIA scaler and want to test both.

This also explains a common question: how is this different from DLSS Frame Generation? DLSS frame generation relies on engine data, such as motion vectors, that a finished video stream doesn't contain. frameglide estimates motion from the frames themselves. That's a real advantage for consoles, and a real limitation, since a video-only model can make mistakes that an engine-fed model avoids.

The Edge Cases Practitioners Hit

Here's where the reality gets messier than the marketing. Several behaviours will surprise you if you go in expecting a polished product.

  • HUD text wobbles during fast motion. Every frame generator does this to some degree. Press I to compare with frame generation off and decide whether it bothers you.
  • Only the PS5 over Remote Play is listed as tested. Xbox through its app window and any console over a capture card are Experimental.
  • Even-out for 40–60 fps games is Experimental too. It spaces frames of 40–60 fps games evenly across a 60 Hz stream, and it's on by default.
  • HDR is off by default. Its HDR output is Experimental.
  • Only one frame generator should run at a time. Turn off other frame-generation features for frameglide and for the streamer.

Can a 30 fps game run at 60 fps on a mid-range PC? Yes, if the GPU has headroom for the generated frames. But the output is only as good as the frames the stream delivers, so a compressed, soft stream gives the model less to work with.

Verifying the Result Yourself

Don't trust any benchmark claim, including the ones above, until you've seen your own screen. frameglide has built-in tools for this.

  • Press R in the video window to save the last 30 seconds to 5 minutes as an MP4 at the frame rate you see.
  • Press B to save a before & after video comparing frame generation off and on. Use Ctrl+Alt+R and Ctrl+Alt+B from any window.
  • Use the built-in 60 fps test mode to check that your display and pipeline hold the target rate.

Run the comparison on the same scene, at the same settings, and watch for the moments that matter most to you: panning shots, UI text and fast camera turns. Then decide whether the smoothness is worth the delay for that specific game.

Frequently Asked Questions

What is PS5 frame interpolation?

PS5 frame interpolation is a process where your PC receives a 30 fps console stream and uses an AI model to draw extra frames between each real pair. The result is smoother motion on a high-refresh monitor, such as 60, 90 or 120 fps. It runs on the PC, so nothing is installed on the console. It adds some input lag, because the next real frame must be buffered first.

How do I get 60 fps from a 30 fps PS5 game?

Register your PS5 for Remote Play, install frameglide on a Windows PC with an NVIDIA RTX card, press Play in the app, and set the frame rate to 60. The app generates one frame between each real pair. If the picture stays black, turn off HDCP on the console, reconnect, and turn it back on afterwards.

Why does frame interpolation add input lag?

Interpolation needs the next real frame before it can show the frame in between, so the newer frame waits in a buffer. frameglide's README reports about 36 ms of added delay at 90 fps and about 20 ms at 60 fps, on top of Remote Play's own latency. The picture looks smoother, but the controls still respond at roughly 30 fps speed.

Does frameglide work with AMD or Intel graphics cards?

Yes, but only as an Experimental option through DirectML. The project says it runs about 1.7× more slowly than the TensorRT path on NVIDIA cards, so expect 60 fps and possibly 90 fps on a fast card. FSR 1 scaling is also available on AMD hardware.

Smoother Motion Is Worth Testing, Not Assuming

The short version is this: PS5 frame interpolation on a PC can turn a 30 fps Quality-mode game into a 60 or 90 fps picture, at the cost of extra input lag. Check the SHA-256 hash, fix HDCP if the screen stays black, and use the before & after tools before you decide. Try frameglide on one 30 fps game this week, run the B comparison, and note how the trade-off feels. Pass this along to anyone whose PS5 game looks like a slideshow on a 120 Hz monitor.