Quick Answer: An FCFS mint on BNB Chain is decided by block order, so your transaction has to be included within seconds of the sale opening. The open-source fastmint-fcfs skill previews the call through Binance Agentic Wallet's backend, then executes once the simulation passes. The author's one real mint landed about 2.0 seconds after its trigger.

Free mints on BNB Smart Chain often sell out before you finish refreshing the page. In a first-come, first-served sale, the winner is usually whoever gets a transaction into a block first, not whoever clicked first. The GitHub project fastmint-fcfs-agentic tries to automate that race for AI agents. Here's how it works, what its numbers really mean, and where it can still fail you.

Why the Sequential Approach Loses the Race

The earlier version of this tool followed a logical order: wait for a public RPC to report a successful eth_call, then send a preview, then execute. Each stage waited for the one before it, and the total came to 5–6 seconds after the opening block.

The usual advice in mint circles is to pick the fastest RPC and spam requests. That misses the real bottleneck, which was sequencing. Node latency mattered less than the fact that nothing could start until something else had finished. On a sale that's gone in seconds, a three-second lag is often the entire sale.

The reason for the two-step pattern is the wallet itself. The baw CLI has no direct-send command for contract calls. It requires contract-call preview, which has the backend simulate the call and return a requestId, and then contract-call execute --requestId. You can't skip the preview, so the speedup has to come from running that preview earlier and in parallel.

Three Triggers Fire in Parallel

Instead of waiting on a single signal, the fire.js script opens a 3-second burst window after the sale opens. During that window, three triggers can each launch a preview on their own:

  • Clock: fires at exactly T+0 according to an NTP-corrected clock, synced to time.apple.com or pool.ntp.org.
  • Head: fires when the first block with a timestamp at or after the start time appears, watched through WebSocket newHeads and HTTP polling every 150ms.
  • eth_call OK: fires when a simulation from the wallet succeeds on one of the four fastest RPCs, checked every 100ms on the latest and pending tags.

Previews are spaced at least 350ms apart and capped at three in flight. The first one that returns simulation code 000000000 is executed immediately, exactly once. The others are ignored.

Here's where most people misread the design. Previews that fail with error 351805 are not a problem. They just mean the backend hasn't seen the opening block yet, and the next trigger retries. After the burst ends, only the eth_call trigger keeps running, so a late sale doesn't burn through the --maxPreviews budget.

Choosing RPCs by Latency and Revert Quality

The RPC pool is measured when the script starts and re-ranked at T-10 seconds, based on latency and block lag. From Indonesia, the author's measurements looked like this:

RPC endpointMeasured latency (from Indonesia)Role in pool
QuikNode31 msFastest; also used for WebSocket newHeads
bloXroute32 msRanked near the top
48.club45 msRanked near the top
Official BSC dataseed~105 msFallback
publicnode~200 msFallback

Latency isn't the only criterion. Nodes that strip revert data are excluded entirely, and zon is one example. The reason is that a revert with no data looks exactly like "not open yet," so the script can't tell the two apart.

The eth_call race works like this: the first successful response wins. A revert that includes data also wins, because it's deterministic. A revert with no data only counts once every node has answered, and it's never treated as fatal on its own. This is the part most DIY mint bots get wrong. They treat any error as either a failure or a green light.

Reading Revert Errors So You Don't Miss or Waste the Mint

Error names are decoded in order: first from the contract's Sourcify ABI, then from a built-in list of common errors, then from 4byte. Each name is then sorted into one of three buckets:

  1. Wait: names like NotStarted, NotOpen, NotLive, TooEarly, and Paused. The script keeps retrying until --timeout, which defaults to 600 seconds.
  2. Fatal: names like SoldOut, FreeGone, AlreadyClaimed, AgentIdRequired, NotEligible, and WrongValue. The script stops within about 50ms.
  3. Unknown: treated as "wait" until start + --grace (10 seconds by default), and fatal after that.

Why does a mint transaction revert at all, when the contract looks open? Usually the sale hasn't started from the contract's point of view, the wallet isn't eligible, or the calldata doesn't match the function. The classification exists so the script doesn't quit early on a timing revert or keep retrying a sold-out sale. You can override it with --waitOn and --fatalOn regex flags, which is useful when a project uses custom error names.

Setting Up Without a Private Key

The design keeps the private key off your machine. Signing happens in Binance's backend through Developer Mode in the Binance App, and the agent only prepares calldata and picks the moment to send it.

The setup has four steps. You need Node.js 20 or newer and the Binance Agentic Wallet CLI, installed with npm install -g @binance/agentic-wallet@1.12.0. Then turn on Developer Mode in the app under Agentic Wallet → Settings, and make sure your wallet balance is under the Developer Mode cap. Next, sign in with baw auth signin --json, approve the pairing code in the app, and confirm with baw wallet status --json. The session lasts two days or 48 hours of inactivity, so you'll need to sign in again. Finally, run ./fastmint.sh bench, which is read-only and checks the RPC ranking, clock offset, wallet status, and BNB balance.

If you want faster RPCs, the .env file accepts a premium endpoint through FASTMINT_RPCS_EXTRA and FASTMINT_WS_EXTRA. The endpoint gets prepended to the pool but is still ranked against the others, so it has to earn its position.

Safety Rails and Where the Approach Breaks

Speed is the easy part. The harder question is whether the calldata is right. Recon pulls function names and ABI signatures from the site's JavaScript bundles and agent documents, and bundles can be stale or wrong. A fast, wrong transaction is still a loss.

That's why the workflow starts with a rehearsal. Running ./fastmint.sh fire ... --dry goes through everything up to the preview and then stops. Check that the call = line decodes to the function and arguments you expect. Add --gateSim if you want the rehearsal to exercise the time-gated path, and --expectNft to execute only if the preview shows exactly the NFT count you want.

Paid mints need an explicit --value from you, and --maxValue is required whenever value is above zero. The script rejects any value above the cap, which limits how much a bad parameter can cost you.

The 2.0-second figure needs context. It comes from one real mint plus three time-gated dry runs, all measured from one location. It shows the design works in that case. It doesn't guarantee the same result on a congested block, a different network path, or a sale that uses an allowlist. Also keep in mind that in a real FCFS race, block order and gas decide the winner, and a fast trigger doesn't override either.

Frequently Asked Questions

what is an fcfs mint on bnb chain?

An FCFS (first-come, first-served) mint is a sale where supply is limited and allocated by transaction order. On BNB Smart Chain, your transaction has to be included in a block before supply runs out, so timing and block inclusion decide the outcome. The fastmint-fcfs skill automates the timing part.

how to mint an nft at sale open without a private key?

Install the Binance Agentic Wallet CLI, enable Developer Mode in the Binance App, and sign in with baw auth signin. Signing is handled by Binance's backend, so no private key is stored on your machine. Run ./fastmint.sh bench to check your setup, then rehearse with --dry before using the live fire command.

why does my mint transaction revert?

Common reasons are that the sale hasn't opened yet from the contract's view, you aren't eligible, the price or value doesn't match, or the calldata calls the wrong function. Errors like NotOpen mean wait, while SoldOut or NotEligible mean stop. Decoding the error name against the contract's ABI tells you which one you're dealing with.

is it safe to let an agent send mint transactions for me?

It's reasonably safe if you rehearse first, cap paid mints with --maxValue, and check the decoded calldata before going live. The main risk is wrong calldata or an unexpected sale condition, not the signing. Only run it on a sale you've verified yourself.

Pick one free mint you're already tracking this week, run ./fastmint.sh bench against it, and note the RPC ranking and clock offset the script reports. That single check tells you more about whether your setup can win an FCFS mint on BNB Chain than any benchmark in a README.